Static routing
DHCP Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
‹ 802.11g Wireless Access Point
54Mbps Access Point for wireless connectivity
Interoperable with IEEE 802.11g (PBCC & OFDM Modulation
Technology supports) 2.4GHz compliant equipment
Supports full mobility and seamless roaming from cell to cell
Support Ad hoc and Infrastructure mode
Support AP client architecture
Support WEP (64/128 bit)
Provides up to 30 users wireless connection
Work range: per node indoors approximately 30m~100m,
Outdoor (line of sight) 200m~300m depending on data rates
External antenna: one 2dbi detachable antennas with diversity support (Reverse SMA connector)
‹ RF Specification
Frequency band 2400-24835 MHZ (ISM), DSSS spreading, CCK, OFDM modulation
Max Power Transmission 100mW
1 internal antenna, 1 external antenna
‹ Ethernet Features
Four RJ-45 connectors for 10/100 Mbps Ethernet LAN connection,
DMZ function can be set up between them
Complies with IEEE 802.3u specification
Supports Auto-Negotiation
Supports Auto-MDIX, Auto-MDI
Supports IEEE 802.3x Flow control in Full Duplex mode
‹ Security & Firewall Functions
WEP/Firewall + MAC filter
Specification
‹ Hardware
Line Connection: RJ-11, RJ-45 Connection
4
