Quick Reference Guide
Using Your Stylus CX Without a Computer
Maintaining Your Stylus CX
Solving Problems
Requirements and Notices
CPD-16737
4046294-00
Ink Cartridge Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Removing and Installing Ink Cartridges . . . . . . . . . . . . . . . . . . 21
Cleaning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Running a Nozzle Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Aligning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3
LCD Panel Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 36
FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Epson America, Inc. Limited Warranty . . . . . . . . . . . . . . . . . . . . . 39
4
Using Your Stylus CX
You can use your EPSON Stylus® CX5400 to make color copies without turning
on your computer. All you have to do is place your original on the glass and press
the button.
You can also make special copies—such as 4 × 6 glossy photos—by using the
Stylus CX menus. In addition, the menus let you run maintenance programs and
check your ink levels, as described on page 19.
For more information on copying, printing, scanning, and maintenance, double-
click the
EPSON Information Center icon on your computer desktop.
5
Stylus CX Buttons
Button
Function
P On
Turn the Stylus CX on and off.
Start EPSON Smart Panel™ on your computer.
] Scan
N Recall/Save (3 sec)
Press and hold for 3 seconds to save settings.
Press and release to select saved settings.
Reset/Reset All (3 sec)
Press to return menu setting to the default.
Press and hold for 3 seconds to return all settings to
their defaults.
l r Menu
Select menus on the LCD screen.
Select the number of copies or menu settings.
Copy in black and white.
+ – Copies/Value
x B&W Copy
x Color Copy/Enter
y Stop/Return to Top
Copy in color.
Stop copying or return the LCD screen to normal
display.
6
Stylus CX Menus
Menu
Options*
Description
Normal display 1–99
Press + or – to set the number of copies.
Copy Mode
Standard Margins Copy with normal margins.
Border Free
Small Margins
Repeat
Size photos as necessary to fit to the
edges of your 4 x 6 or 5 x 7 paper.
Copy with only a 1.5-mm margin around
the edges. For copies on 4 x 6 or 5 x 7
paper only.
8
8
7
1
8
2
9
3
10
1
8
2
9
3
10
4
5
6
4
5
6
7
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Copy an image multiple times on one
sheet (for small images only).
2-up
4-up
Copy two originals onto one sheet.
Copy four originals onto one sheet.
Copy with draft quality to save ink.
Quality&Paper Plain Paper-Econ
Plain Paper-Norm Copy text with normal quality.
Plain Paper-Fine
Copy text and graphics with higher
quality.
Plain Paper-Best
Copy text and graphics with highest
quality.
Matte Paper HW
Photo Paper
High-quality copy on EPSON Matte
Paper Heavyweight.
High-quality copy on EPSON Photo
Paper or Glossy Photo Paper.
DB Photo Paper
High-quality copy on EPSON DURABrite
Ink Glossy Photo Paper.
7
Menu
Options*
Description
Paper size
Letter
4 x 6
5 x 7
A4
Select the size paper you are using (not
the size of your original).
Lighter/Darker – NnnonnO +
Press + for darker copies or – for lighter
copies.
Reduce/
Enlarge
4 x 6 > Letter
5 x 7 > Letter
Actual: 100%
Auto Fit Page
Enlarge a 4 x 6 photo to letter size.
Enlarge a 5 x 7 photo to letter size.
Same size copy.
Automatically resize original to fit the
paper selected.
Letter > A4
A4 > Letter
Letter > 5 x 7
Letter > 4 x 6
Enlarge a letter-size document to A4.
Reduce an A4 document to letter size.
Reduce a letter-size document to 5 x 7.
Reduces a letter size document to 4 x 6.
Zoom In/Out
Language
25 to 400 % in 1 %
increments
Select percentage of enlargement or
reduction.
English
Spanish
Portuguese
French
Select control panel language.
Head
Alignment 1
Press the x Color
Copy button to
start the process.
Align the print head if vertical lines
appear jagged, or printed photos appear
grainy.
Nozzle Check
Press the x Color
Copy button to
print the pattern.
Print a nozzle check pattern to
determine if the print head needs
cleaning.
Head Cleaning Press the x Color
Copy button to
Clean the print head if your printouts are
unexpectedly light, have white or black
lines, or you get a bad nozzle check
pattern.
start the process.
8
Menu
Options*
Description
Change
Cartridge
Press the x Color
Copy button to
start the process.
Replace the cartridge when you see a
message that one of your ink colors is
low or empty.
Ink Levels
Load/Eject
C = cyan
Display the percentage of ink remaining
in each cartridge.
M = magenta
Y = yellow
K = black
Press the x Color
Copy button to
load or eject the
paper.
Feed or eject paper after clearing a
paper jam.
*Default settings are shown in bold.
Copying Documents
1. Make sure your Stylus CX is turned on.
2. Flip the feeder guard forward.
3. Open the output tray and its extension.
4. Insert some paper against the right edge of the sheet feeder. Load letterhead or
preprinted paper top edge first, printed side up.
Feeder guard
Left edge guide
Output tray and extension
9
5. Slide the left edge guide against the paper (but not too tightly).
6. Flip the feeder guard back over the paper. (Make sure you didn’t insert the
paper in front of the feeder guard.)
7. Open the scanner lid.
8. Place your document face-down on the glass, in the upper left corner. Move
your document about 0.1 inch from the top and side edge so your entire
document is scanned. Then close the scanner lid.
Move the document
in about 0.1 inch from
the edges
The current copy settings are displayed on the LCD screen.
■ Use the buttons to select different settings, if necessary. See page 13 for
more information.
Current settings
More than one copy
Color copy
Black and white copy
10
■ For multiple copies, press the + Copies button to select the number you
want.
9. Press the x Color Copy button (for color copies) or x B&W Copy button
(for black and white copies). Your document is copied.
Note: Your copied image size may not be the exact same size as your original.
Copying Photographs
You can use the EPSON Stylus CX5400 to copy your favorite photos so they look
just like professional photo reproductions. You can choose from three Copy mode
settings for photos with standard margins, small margins, or no margins
(BorderFree®):
original
photo
Small
margins
Standard
margins
BorderFree
Use either EPSON® Photo Paper, Glossy Photo Paper, or DURABrite Ink Glossy
Photo Paper.
EPSON paper name
Size
Setting
Photo Paper or Glossy Photo Paper
DURABrite Ink Glossy Photo Paper
4 × 6
4 × 6
Photo Paper
DB Photo Paper
11
Loading Paper and Placing Your Photo
1. Flip the feeder guard forward.
2. Open the output tray and its extension.
3. Insert up to 20 sheets of EPSON Photo Paper, Glossy Photo Paper, or
DURABrite Ink Glossy Photo Paper against the right edge of the sheet feeder.
Load the paper with the shiny side face-up, short edge first (even for
landscape-oriented photos).
4. Slide the left edge guide against the paper (but not too tightly).
5. Flip the feeder guard back over the paper. (Make sure you didn’t insert the
paper in front of the feeder guard.)
Feeder guard
Left edge guide
Output tray and extension
12
6. Open the scanner lid and place your photo face-down on the glass, in the
upper left corner.
Make sure you place the short edge of the photo next to the left side of the
glass. Move the photo about 0.1 inch from the top and side edge so the entire
photo is scanned.
Move the photo in
about 0.1 inch from
the edges
Right menu
button
7. Close the scanner lid.
Selecting Photo Settings
1. Press the right Menu button to display Copy mode
Copy mode
on the LCD screen.
Standard Margins
■ If you want a photo without white borders, press
Copy mode
the – Value button to select Border Free.
BorderFree
■ If you want a photo with small white borders
Copy mode
press the – Value button again to select
Small margins
Small margins.
2. Press the right Menu button again to display
Quality&Paper
Quality&Paper.
Photo Paper
If you’re using DURABrite Ink Glossy Photo Paper,
press the – Value button to select DB Photo Paper.
3. Press the right Menu button to display
Paper size
Paper size 4 × 6.
4x6
4. Press the y Stop button to save your settings.
13
5. For multiple copies, press the + Copies button to select the number you
want.
6. Press the x Color Copy button. Your photo is scanned and printed.
Improving Copy Quality
You can use the Quality&Paper menu on the Stylus CX to improve the quality of
your copies on plain paper, EPSON Premium Bright White Paper, Photo Quality
Ink Jet Paper, or Matte Paper Heavyweight.
1. Load paper and place your document on the glass as described on pages 9 and
10.
2. Press the right Menu button until you see
Quality&Paper
Quality&Paper on the LCD screen.
Plain Paper-Norm
3. Press the – Value button to select Plain Paper-Fine
Quality&Paper
or Plain Paper-Best.
Plain Paper-Best
If you’re using EPSON Matte Paper Heavyweight,
Quality&Paper
press the – Value button again to select
Matte Paper HW
Matte Paper HW.
4. Press the y Stop button to save your settings.
5. For multiple copies, press the + Copies button to select the number you
want.
6. Press the x Color Copy or B&W Copy button. Your document is copied.
Making Copies Lighter or Darker
Whether you’re copying documents or photographs, you can use the Stylus CX
menu to lighten or darken your copies as necessary.
1. Load paper and place your document or photo on the glass as described on
pages 9 to 13.
2. Select your copy mode and other settings as described above.
14
3. Press the right Menu button until you see Lighter/
Darker on the LCD screen.
Lighter/Darker
– NnnonnO +
4. Press the – Value button to select a lighter setting, or
the + Value button to select a darker setting.
5. Press the y Stop button to save your settings.
6. For multiple copies, press the + Copies button to select the number you want.
7. Press the x Color Copy or B&W Copy button. Your document is copied.
Reducing or Enlarging Copies
You can have the Stylus CX resize your document automatically to fit the paper
you’re using, or you can select a specific percentage of enlargement or reduction.
1. Load paper and place your document or photo on the glass as described on
pages 9 to 13.
2. Select your copy mode and other settings as described above.
3. Press the right Menu button until you see Paper size
Paper size
on the LCD screen.
Letter
4. If you are not using normal letter-size paper
(8.5 x 11 inches), press the – Value button to select the size you’re using:
4 x 6, 5 x 7, or A4 (8.3 x 11.7 inches).
5. Press the right Menu button until you see
Reduce/Enlarge
Reduce/Enlarge on the LCD screen.
Actual:100%
6. Press the – Value button to select Auto Fit Page.
Reduce/Enlarge
The Stylus CX will automatically resize your copy to
Auto Fit Page
fit the size paper you are using.
■ If you want to convert from one size to another,
Reduce/Enlarge
press the + or – Value buttons to select the setting
4x6->Letter
you want, as listed on page 8.
■ If you want to select a specific percentage of
Zoom In/Out
enlargement or reduction, press the right Menu
100%
button until you see Zoom In/Out on the screen.
Then press the + or – Value buttons to select the percentage you want.
15
7. Press the y Stop button to save your settings.
8. For multiple copies, press the + Copies button to select the number you
want.
9. Press the x Color Copy or B&W Copy button. Your document is copied.
Note: If you select Auto Fit Page as the Reduce/Enlarge setting to copy a document
with white or very light colored edges, the original size may not be recognized correctly.
If this occurs, select 100% as the Reduce/Enlarge setting and use the Zoom In/Out
setting to adjust the size of your copy.
Making Multiple Copies on One Sheet
You can place two or four pages (reduced) on a single sheet of paper. You can also
place multiple copies of a business card (or other small image) on a single sheet of
paper. Follow the instructions below for the type of copies you want.
Multiple Copies of a Card or Small Image
1. Make sure letter-size paper is loaded in the Stylus CX.
2. Place your card or wallet-size photo in the upper left corner of the glass.
3. Press the right Menu button to display Copy mode
Copy mode
on the LCD screen.
Standard Margins
4. Press the – Value button until you see Repeat on
Copy mode
the screen.
Repeat
5. Press the x Color Copy or B&W Copy button.
Your card or photo is copied multiple times on one sheet. The number of
times the image is repeated depends on the size of the image and the way you
place it on the glass.
16
Two or Four Pages on a Sheet
1. Make sure letter-size paper is loaded in the Stylus CX.
2. Place the first page on the glass, with the top of the page at the left side.
3. Press the right Menu button to display Copy mode
Copy mode
on the LCD screen.
Standard Margins
4. Press the – Value button to select the mode you
want:
■ To place two pages on a single sheet of paper,
Copy mode
select 2-up.
2-up
■ To place four pages on a single sheet of paper,
Copy mode
select 4-up.
4-up
5. Press the x Color Copy or B&W Copy button.
You see a message prompting you to change the original and press the
x Color Copy button.
6. Place the second page on the glass, with the top of the page at the left side.
7. Press the x Color Copy or B&W Copy button.
■ If you are making a 2-up copy, your page is printed.
■ If you are making a 4-up copy, you see another message prompting you to
change the original and press the button. Repeat steps 6 and 7 twice to
complete your 4-up copy.
17
Saving and Reusing Copy Settings
You can save your custom copy settings so you can quickly reuse them for similar
copying jobs. For example, you might want to save settings for copying a 4 × 6
snapshot on EPSON DURABrite Ink Glossy Photo Paper. You can then “reprint”
photos by pressing a single button.
1. After selecting settings, press and hold the Recall
button until you see Stored on the LCD screen.
Stored
2. To use your saved custom settings, press the Recall
button until you see Recalled on the screen. Your custom settings are
automatically selected again.
3. To return to the default settings, press the Reset button.
4. Whenever you want to use your saved settings, press the Recall button again.
5. If you want to save a different group of settings, repeat step 1. This will
replace your previously saved settings.
Cancelling Copies and Settings
You can cancel a copy job in progress, or cancel settings.
■ To cancel a copy job in progress, simply press the
y Stop button. Cancelled appears on the LCD
Cancelled
screen, and your page is immediately ejected.
You can also press the y Stop button to return the LCD screen to normal
display.
■ To cancel settings on the current menu, press the Reset button.
■ To cancel all settings and return to the defaults, press
Resetting
and hold the Reset button until Resetting appears
on the LCD screen.
18
Maintaining Your Stylus CX
You can use the buttons on the Stylus CX to run maintenance programs and see
how much ink you have left.
View instructions and ink levels
Start maintenance
programs
Select maintenance
programs
Checking Ink Levels
Press the left Menu button until you see Ink Levels on
the LCD screen. This shows an approximate percentage
of the ink remaining in each cartridge.
Ink Levels
C: 80% M: 80%
The display changes from C (cyan) and M (magenta) to
Y (yellow) and K (black).
Ink Levels
Y: 80% K: 70%
The B icon that appears on the screen also lets you know
when ink is low.
If you see an ink out message on the LCD screen, follow the instructions in the
next section to replace the cartridge.
19
Replacing an Ink Cartridge
If the Error light on the Stylus CX is flashing and you see an ink out message on
the screen, you need to replace an ink cartridge.
When a cartridge is more than six months old, you may need to replace it if
printouts don’t look their best. If the quality doesn’t improve after cleaning and
aligning the print head, you can replace the cartridge.
Be sure you have a new ink cartridge before you begin. Once you start the ink
cartridge replacement procedure, you must complete all the steps in one session.
Purchasing Ink Cartridges
Use these EPSON ink cartridges within six months of installing them and before
the expiration date on the package:
■ Black ink cartridge: T0321
■ Cyan ink cartridge: T0422
■ Magenta ink cartridge: T0423
■ Yellow ink cartridge: T0424
Caution: To ensure good results, use genuine EPSON ink cartridges and do not refill
them. Other products may cause damage to your EPSON Stylus CX5400 not covered
by EPSON’s warranty.
SM
When you need new ink cartridges, contact your dealer, or call the EPSON Store
please call (800) 463-7766 for dealer referral.
Ink Cartridge Precautions
Warning: Keep ink cartridges out of the reach of children and do not drink the ink.
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your
eyes, flush them thoroughly with water.
20
Caution: To avoid damaging the EPSON Stylus CX5400, never move the print head by
hand.
You cannot print if any ink cartridge is empty. Leave the empty cartridge installed until
you have obtained a replacement. Otherwise the ink remaining in the print head nozzles
may dry out.
Removing and Installing Ink Cartridges
1. Make sure the Stylus CX is turned on and not printing. Check the LCD
screen to see which ink cartridge is empty. Then press the x Color Copy
button.
If ink is low (or your cartridge is too old), and you don’t see an ink out
message on the LCD screen, press the left Menu button until you see Change
Cartridge. Then press the x Color Copy button.
The ink cartridges move to the replacement position.
2. Make sure the scanner cover is closed, then lift up the scanner.
21
3. Pinch the tabs on the front and back of the cartridge, lift it out of the printer,
and dispose of it carefully.
4. Before you remove the new cartridge from its package, shake it four or five
times.
22
5. Unwrap the new ink cartridge and lower it into its holder, then press down on
the top of the cartridge until it clicks in place.
Caution: Don’t touch the green circuit board on the back of the cartridge; you may
inhibit normal operation and printing.
If you need to replace other ink cartridges, repeat steps 3 through 5 before
continuing with step 6.
6. Carefully lower the scanner and press it down until it clicks into place. The
Stylus CX begins charging the ink delivery system.
The On light flashes and the Stylus CX makes noise. Charging takes about 30
seconds. When it’s finished, the On light stops flashing and stays on.
Caution: Never turn off the Stylus CX while the On light is flashing, unless the
Stylus CX hasn’t moved or made noise for more than 5 minutes.
Cleaning the Print Head
If your printouts are unexpectedly light or have white or black lines, you may need
to clean the print head. This unclogs the nozzles so they can deliver ink properly.
Print head cleaning uses ink, so clean it only if quality declines.
1. Press the left Menu button until you see Head Cleaning on the screen.
2. Press the x Color Copy button. Cleaning takes about 30 seconds, during
which the Stylus CX makes some noise and the On light flashes briefly.
Caution: Never turn off the Stylus CX while the On light is flashing, unless the
Stylus CX hasn’t moved or made noise for more than 5 minutes.
23
3. When the On light stops flashing, run a nozzle check to confirm the print
head nozzles are clean.
Running a Nozzle Check
1. Press the left Menu button until you see Nozzle Check on the screen, then
press the x Color Copy button.
2. Examine the nozzle check pattern you print. It should look something like
this, with the lines on the right colored cyan, magenta, and yellow:
Each staggered line should be complete, with no gaps in the dot pattern.
■ If your printout looks okay, you’re done.
■ If you see any gaps as shown below, clean the print head again.
If you don’t see any improvement after cleaning three or four times, check the
solutions on page 31 or in your on-screen EPSON Information Center (double-
click the
icon on your computer desktop). You can also turn the Stylus CX off
and wait overnight to allow any dried ink to soften. Then try cleaning the print
head again.
24
Aligning the Print Head
If your printouts look grainy or vertical lines appear jagged, you may need to align
the print head.
1. Make sure the Stylus CX is turned on and not printing, and the Error light
is off.
2. Load plain, letter-size paper in the sheet feeder.
3. Press the left Menu button until you see Head Alignment, then press
the x Color Copy button to print an alignment page.
4. On the test page, select the pattern with the two vertical lines most precisely
printed on top of each other. You may need to use a magnifying glass or loupe.
Select one pattern each for rows 1, 2, 3, 4, and 5. (In this example, the best
pattern in each row has been circled.)
25
5. Press the + or – button to select the number of the best pattern for the first
row, then press the x Color Copy button. Repeat this step for the second,
third, fourth, and fifth rows.
Note: If you select a pattern other than 8 in any row, that pattern becomes pattern
#8 the next time you align the print head.
6. When you’re finished, press the x Color Copy button to print the second
alignment sheet. Or, if you want to end the alignment process at this point,
press the y Stop button.
7. On the test page, select the pair of horizontal bars with the least noticeable
light or dark band between them. You may need to use a magnifying glass or
loupe.
1
2
3
4
5
6
7
26
8. Press the + or – Value buttons to select the number of the best pattern, then
press the x Color Copy button. (In this example, pattern 4 is best.)
9. When you’re finished, press the x Color Copy button to print the third
alignment sheet. Or, if you want to end the alignment process at this point,
press the y Stop button.
10. Repeat steps 7 through 8 to complete the alignment process.
27
If you have a problem with the Stylus CX, check the messages on the LCD screen
(as described below) or run a nozzle check (as described on page 24). Check for
solutions beginning on page 29.
Checking the Stylus CX Messages
Here is a list of error messages and what you should do when you see them.
Error message
Solution
Quality&Paper setting is
not acceptable for B&W
copy. Press the Stop
button.
Press the y Stop button, then change the
Quality&Paper settings. You can’t copy in black
No XXX ink cartridge – – >
Press the Color Copy
button to install a new ink
cartridge.
The indicated ink cartridge is not installed. See
page 21 for instructions on installing a cartridge.
XXX ink out – – >
The indicated ink cartridge is out of ink. See
page 21 for instructions on replacing the
cartridge.
Press the Color Copy
button to begin replacing
the ink cartridge.
Ink cartridge error – – >
Press the Color Copy
button to begin replacing
the ink cartridge.
There is something wrong with the ink cartridge.
See page 21 for instructions on replacing the
cartridge.
Paper out or misfeed – – > Paper is jammed. Press the x Color Copy button
Press the Color Copy
button and clear the paper
jam by hand if necessary.
to clear the jam. If the jam is not cleared, remove
the paper by hand. For more information, see
page 30.
Paper out – – >
Load paper in the sheet feeder, then press the
Load paper in paper tray
and press the Color Copy
button.
x Color Copy button to continue printing.
28
Error message
Solution
Scanner unit open – – >
Close the scanner unit.
Carefully close the scanner and press it down
until it clicks securely into place.
Scanner error – – >
See your documentation
and call service if
necessary.
Press the On button to turn off the Stylus CX.
Unlock the transportation lock (on the left side of
the scanner glass) if necessary. Turn on your
Stylus CX again. If the error message still appears,
contact your dealer or EPSON as described on
page 32.
Printer error – – >
See your documentation
and call service if
necessary.
Press the On button to turn off the Stylus CX,
then press it again to turn it back on. If the
message still appears, contact your dealer or
EPSON as described on page 32.
Problems and Solutions
For problems setting up your computer and installing your software, see the Start
Here sheet for solutions. For problems scanning, printing, or copying with the
computer, double-click the
computer desktop.
Copying Problems
Only the On light is on, but nothing prints.
■ Run a nozzle check as described on page 24.
■ The print head nozzles may need cleaning; see page 23 for instructions.
■ The Stylus CX won’t operate properly if it’s tilted. Place it on a flat, stable
surface.
The copy size, position, or margins are incorrect.
■ Make sure your paper is positioned on the right side of the sheet feeder with
the left edge guide lightly against its left side. Don’t load paper above the arrow
on the left edge guide.
■ Make sure your paper is loaded short edge first.
29
■ Make sure your original is positioned in the top left corner of the glass, with
the short edge at the left.
■ Make sure you select the Copy mode you want: Standard Margins, Small
Margins, or BorderFree. See page 11 for instructions.
■ If you select Auto Fit Page to copy a document with white or very light edges,
the original size may not be recognized correctly. Select 100% as the Reduce/
Enlarge setting and use the Zoom In/Out setting to adjust the size of your
copy.
The scanner’s fluorescent lamp isn’t on.
■ The lamp turns off automatically to save power (sleep mode). The lamp comes
on when you start scanning.
■ Make sure the Stylus CX is plugged into a power outlet and turned on.
Paper Feeding Problems
Paper doesn’t feed correctly or jams in the printer.
■ If paper doesn’t feed, remove it from the sheet feeder. Fan the paper, load it
against the right side, and slide the left edge guide against the paper (but not
too tightly).
■ If paper jams, follow these steps:
1. Press the On button to turn off the Stylus CX.
2. Lift up the scanner and remove any paper that’s inside, including any small
pieces that may have torn off.
Caution: Clear paper jams by pulling the paper out towards the front of the Stylus
CX. Never pull the paper out in the direction of the sheet feeder.
3. Turn the Stylus CX back on and reload the paper. Make sure the edges of
the paper are not creased or folded.
4. Press the left Menu button until you see Load/Eject on the LCD screen.
5. Press the x Color Copy button to continue.
30
Paper doesn’t eject fully or is wrinkled.
■ If the paper doesn’t eject fully, you may have selected the wrong paper size.
Press the x Color Copy button to eject the paper, then press the right Menu
button until you see Paper size on the LCD screen. Make sure you select the
correct paper size, as described on page 11.
■ If it’s wrinkled when it ejects, the paper may be damp or too thin. Load new
paper.
Copy Quality Problems
If you have any problems with the quality of your copies, try these solutions:
■ Make sure the document is placed flat against the document table glass. If only
part of the image is blurred, your document may be wrinkled or warped.
■ Make sure the Stylus CX is not tilted or placed on an unstable or uneven
surface.
■ Clean the print head; see page 23 for instructions.
■ If a dotted line appears in the image, clean the scanner glass with a soft, dry,
lint-free cloth (paper towels are not recommended). If the glass is still not
clean, use a small amount of glass cleaner on a soft cloth. Make sure you wipe
side should be face up). Load new paper face up. Use EPSON papers for
proper saturation and absorption of genuine EPSON inks.
■ Use a support sheet with special paper or try loading your paper one sheet at
a time.
■ Align the print head; see page 25 for instructions.
■ The ink cartridges may be old or low on ink; see page 20 for instructions on
replacing an ink cartridge.
31
Where To Get Help
If you need help with copying, see the contact information below. Double-click
the
EPSON Information Center icon on your computer desktop or see the
Start Here sheet if you need help with other software that came on your EPSON
Stylus CX5400 CD-ROM.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services listed in the following table:
Service
Access
WorldWide From the Internet, you can reach EPSON Support at
Web
http://support.epson.com. At this site, you can download
drivers and other files, look at product documentation, access
troubleshooting information, and receive technical advice
through e-mail.
Automated
Telephone
Services
A variety of automated help services are available 24 hours a day,
seven days a week. To use these services, you must have a
touch tone telephone and call (800) 922-8911. Your EPSON
SoundAdviceSM Express Code is 70465. Use this code to quickly
select the EPSON Stylus CX5400 in SoundAdvice.
To speak to a technical support representative, dial:
■ U.S.: (562) 276-4382, 6 AM to 6 PM, Pacific Time, Monday through Friday
■ Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday
Toll or long distance charges may apply.
Before you call, please have the following information ready:
■ Product name (EPSON Stylus CX5400)
■ Product serial number (located on the back)
■ Proof of purchase (such as a store receipt) and date of purchase
■ Computer configuration
■ Description of the problem
You can purchase ink cartridges, paper, manuals, and accessories from the EPSON
Canada, please call (800) 463-7766 for dealer referral.
32
Requirements and Notices
Windows System Requirements
To use your EPSON Stylus CX5400 and its software, your system should have:
■
A Microsoft® Windows® compatible PC with a Pentium® 300 MHz or better
processor
■
■
■
■
■
■
Microsoft Windows XP, Windows 2000, Windows Me, or Windows 98
128MB RAM (256MB or more recommended)
VGA monitor or better with at least 256 colors
At least 200MB of free hard disk space (300MB or more recommended)
CD-ROM or DVD drive for installing the software
Windows-compliant USB port and the USB cable that came with your EPSON
Stylus CX5400.
Macintosh System Requirements
To use your EPSON Stylus CX5400 and its software, your system should have:
■
An Apple® iMac™ series, Power Macintosh® G3 or G4, PowerBook,® iBook™, or
eMac™
■
■
Mac® OS 8.6 through 9.x or OS X 10.2.x (Mac OS 9.1 or later recommended)
At least 128MB of available RAM (256MB or more recommended and required with
OS X 10.2.x)
■
■
■
■
At least 200MB of free hard disk space (300MB or more recommended)
VGA display or better with at least 256 colors
CD-ROM or DVD drive for installing the software
The USB cable that came with your EPSON Stylus CX5400.
33
Important Safety Instructions
Before using your EPSON Stylus CX5400, read and follow these safety instructions:
■
■
■
Be sure to follow all warnings and instructions marked on the Stylus CX.
Use only the type of power source indicated on the Stylus CX label.
Connect all equipment to properly grounded power outlets. Avoid using outlets on
the same circuit as air control systems or other high-load devices that regularly switch
on and off.
■
Place the Stylus CX near a wall outlet where the plug can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée
facilement.
■
■
Do not let the power cord become damaged or frayed.
If you use an extension cord with the Stylus CX, make sure the total ampere rating of
the devices plugged into the extension cord does not exceed the cord’s ampere rating.
Also, make sure the total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet’s ampere rating.
■
■
Avoid electrical outlets controlled by wall switches or automatic timers.
Keep your Stylus CX and computer system away from potential sources of
electromagnetic interference, such as loudspeakers or cordless telephone base units.
■
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
■
■
■
Leave enough room around the Stylus CX for sufficient ventilation.
Do not place the Stylus CX near a radiator or heating vent or in direct sunlight.
Place the Stylus CX on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle. Leave enough space
in front of the Stylus CX (at least 9 inches) so it doesn’t tip forward and fall off of the
work surface.
■
Turn off and unplug the Stylus CX before cleaning. Clean with a damp cloth only.
Do not spill liquid on it.
Caution: Always turn the Stylus CX off using the On button. Don’t turn off
the power using a switch on a power strip or unplug the Stylus CX until the
On light is off.
■
■
Do not block or cover openings in the Stylus CX case or insert objects through the
slots.
Except as specifically explained in your documentation, do not attempt to service the
Stylus CX yourself.
34
■
Unplug the Stylus CX and refer servicing to qualified service personnel under the
following conditions: if the power cord or plug is damaged; if liquid has entered the
product; if the product has been dropped or the case damaged; if the product does not
operate normally or exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
■
■
Before transporting the Stylus CX, make sure the print head is capped in the far right
position, the ink cartridges are in place, and the scanner is secured by the
transportation lock.
This product includes a lamp component that contains mercury. Please consult your
state and local regulations regarding disposal or recycling. Do not put in the trash.
Ink Cartridge Safety Instructions
■
Leave the ink cartridges installed. Removing the cartridges can dehydrate the print
head and may prevent the EPSON Stylus CX5400 from printing.
■
■
Keep ink cartridges out of the reach of children and do not drink the ink.
Be careful when you handle used ink cartridges; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water.
■
■
■
Do not put your hand inside the Stylus CX or touch the cartridge during printing.
Do not move the print head by hand; otherwise you may damage the Stylus CX.
Install the ink cartridge immediately after you remove it from its package. Leaving the
cartridge unpacked for a long time before use may result in reduced print quality.
■
■
■
Do not use an ink cartridge beyond the date printed on the cartridge package. For
best results, use up the ink cartridges within six months of first installing them.
Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom
of its package faces down.
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.
■
■
Do not remove or tear the ink cartridge label; this can cause leakage.
Do not dismantle the ink cartridges or try to refill them. This could result in damage
to the print head.
■
Do not touch the green IC chip on the side of the cartridge. This may affect normal
operation and printing.
35
■
If you remove an ink cartridge for later use, protect the ink supply area from dirt and
dust and store it in the same environment as the Stylus CX. Note that there is a valve
in the ink supply port, making covers or plugs unnecessary, but care is needed to
prevent the ink from staining items that the cartridge touches. Do not touch the ink
cartridge ink supply port or surrounding area.
LCD Panel Safety Instructions
■
Use only a dry soft cloth to clean the LCD display. Don’t use liquid or chemical
cleaners.
■
■
If the LCD display is damaged, contact your dealer.
If LCD solution gets on your skin, wash it off thoroughly with soap and water. If it
gets in your eyes, flush them immediately with water.
36
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio and television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
■
Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC Certification of this device and may cause interference levels which
exceed the limits established by the FCC for this equipment. It is the responsibility of the
user to obtain and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables connected to
unused interfaces. Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
For Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
37
Declaration of Conformity
According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals;
and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We:
Located at:
EPSON AMERICA, INC.
MS 3-13
3840 Kilroy Airport Way
Long Beach, CA 90806
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR
Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is
identical to the representative unit tested and found to be compliant with the standards.
Records maintained continue to reflect the equipment being produced can be expected to
be within the variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR §2.909. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Trade Name:
Type of Product: Multifunction printer
Model: C141A
EPSON
ENERGY STAR Compliance
As an ENERGY STAR Partner, EPSON has determined that this
product meets the ENERGY STAR guidelines for energy
efficiency. The EPA ENERGY STAR office equipment program is
a voluntary partnership with the computer and office equipment
industry to promote the introduction of energy-efficient personal
computers, monitors, printers, fax machines, and copiers in an
effort to reduce air pollution caused by power generation.
38
Epson America, Inc. Limited Warranty
What Is Covered: Epson America, Inc. (“Epson”) warrants to the first retail purchaser that
the EPSON product covered by this limited warranty statement, if purchased and used in
the United States or Canada, conforms to the manufacturer’s specifications and will be
free from defects in workmanship and materials for a period of one (1) year from the date
of original purchase. Epson also warrants that the consumable ink cartridges enclosed with
the product will perform to the manufacturer’s specified usage, which usage may expire
before the expiration of the limited warranty for the EPSON product. For warranty
service, you must provide proof of the date of original purchase.
What Epson Will Do To Correct Problems: Should your EPSON product prove
defective during the warranty period, please call the EPSON ConnectionSM at
(562) 276-4382 (U.S.) or (905) 709-3839 (Canada) for warranty repair instructions and
return authorization. An Epson service technician will provide telephone diagnostic service
to determine whether the product requires service. If service is needed, Epson will, at its
option, exchange or repair the product without charge for parts or labor. If Epson
authorizes an exchange for the defective unit, Epson will ship a replacement product to
you, freight prepaid, so long as you use an address in Canada or the U.S. (excluding Puerto
Rico and U.S. Possessions). Shipments to other locations will be made freight collect. You
are responsible for securely packaging the defective unit and returning it to Epson within
five (5) working days of receipt of the replacement. Epson requires a debit or a credit card
number to secure the cost of the replacement product in the event that you fail to return
the defective one. If your product is being repaired, Epson will direct you to send your
product to Epson or its authorized service center, where the product will be fixed and sent
back to you. You are responsible for packing the product and for all costs to and from the
Epson authorized service center. When warranty service involves the exchange of the
product or a part, the item replaced becomes Epson property. The replacement product or
part may be new or refurbished to the Epson standard of quality, and, at Epson’s option,
may be another model of like kind and quality. Epson’s liability for replacement of the
covered product will not exceed the original retail selling price of the covered product.
Exchange products and parts assume the remaining warranty period of your original
product covered by this limited warranty.
What This Warranty Does Not Cover: This warranty covers only normal use in the
United States and Canada. This warranty is not transferable and will not apply to products
purchased from an end user. This warranty does not cover any color change or fading of
prints or reimbursement of materials or services required for reprinting. This warranty
does not cover damage to the EPSON product caused by parts or supplies not
manufactured, distributed or certified by Epson. This warranty does not cover ribbons,
ink cartridges or third party parts, components, or peripheral devices added to the EPSON
product after its shipment from Epson, e.g., dealer or user-added boards or components.
Epson is not responsible for warranty service should the Epson label or logo or the rating
39
label or serial number be removed or should the product fail to be properly maintained or
fail to function properly as a result of misuse, abuse, improper installation, neglect,
improper shipping, damage caused by disasters such as fire, flood, and lightning, improper
electrical current, software problems, interaction with non-Epson products, or service
other than by an Epson Authorized Servicer. If a claimed defect cannot be identified or
reproduced, you will be held responsible for the costs incurred.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME
LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF
THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE
LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS
STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS MADE BY ANY
OTHER PERSON OR FIRM ARE VOID. EXCEPT AS PROVIDED IN THIS
WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC. NOR ITS
AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR
DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY
TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF
WARRANTY OR ANY OTHER LEGAL THEORY.
In Canada, warranties include both warranties and conditions.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, and
some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary from jurisdiction
to jurisdiction.
Epson America, Inc. ■ P.O. Box 93012 ■ Long Beach, CA 90809-3012
40
|